Aluminium Formwork, is a very new technology for construstion industry this years. Aluminium Form work system is already widely used in APAC, System Formwork used in Japan, System Formwork used in Singapore, System Formwork used in Malaysia and the Middle East for construction works very well already, for low rises and also for high rises. Aluminium form work system can save cost for building company, also saves time and improves the quality of construction site.
Aluminum Formwork System is very cost effective building materials. Aluminum Formwork Panels can be designed for any parts and component of building, such as windows, stairs, balconies and special structures. This Alumimiun Formwork Designs are unique because of all the components in the system, including slab floors/wall/columns/beams/staircases/balconies and window hood, are concreted at one time and there is no need for more blockworks or brickworks.
All structure of the building is concreted at one time so we can control the construction quality very well. It makes the form finish, eliminates the need for external and internal plaster and the walls can be directly painted with a minimal skim coat, all these ultimately resulting in cost saving.
Short construct period in average 4-5days/floor
300 reuse times, reduce average project cost
Easy to use, high efficiency, don’t need workers with high specialized skills
Good stability, high bearing up to 60KN/M2
High project quality, smooth surface, no need plaster process
No construction trash and noise, reduce potential safety risk
80% standard components, can be reused in next project
High recycle value, average value up to US$60/M2
Eco-friendly, comply with environmental protection requirements
Simple supporting system, make the site wide space
Industry standard reuse time up to 300 times for oversea projects
4.00 mm A6061-T6
18mm Film Faced Plywood
600mm/450mm/300mm X 2,400mm X 65mm
Flat & Smooth Surface
Average weight about 20 - 25 kg/m2, only a single worker could move the Aluminum formwork easily.
No heavy lifting or cranes are required.
Since it is very convenient to use, even a greenhand can be a professional through simple training.
Project period short in 4-5 days/floor
Use A6061-T6, the most suitable material for industrial and residential construction.
It is a green formwork with low carbon emissions.
Reused 300 times make maximized ROI with multiple projects.
80% standard formwork panels could be reused.
The Aluminium materials recycle value is up to 30% of the purchase cost.
Antai formwork system has accuracy in 99% for horizontal and 100% for vertical structure.
Compared to existing Euro-form, AL formwork has more accuracy in horizontal and vertical structure.
The concrete surface flat& smooth.
No need heavy backing plaster, effectively for plaster cost saving.
Adopts the integrative design, load 60KN/ m2, which could reduce the safety loophole leaded by the construction and materials.
Save much cost than wooden system formwork once turnover 55 times, meanwhile it can reduce labor cost, and cost for transportation of raw materials, material loss, and waste disposal, etc.
Recycle 30 times cost(USD)
Recycle 60 times cost(USD)
Recycle 90 times cost(USD)
Billets→Extrusion→Cutting → Punching →Welding→ Coating →Assembly
Raw Material: Aluminium A6061-T6
Technical: Extrusion Technology/Dual-Robots Welding technology/Assemble technology
Components: Formwork System/Supporting/Accessories
Wall Panel Size: 600mm/450mm/300mm X 2,400mm X 65mm
Slab Panel Size: 600mm/450mm/300mm X 1,200mm X 65mm
Panels System and Supporting System and Accessories System consist of Formwork System
Forms the closed surface of concrete structure,
ensure the forming structure while concreting
Wall End Panel
Supporting the concrete
structure, guarantee the
slab, beam, cantilever
The connection components,
integrate formwork system
and support system into a
completed formwork system
Round & Long &Wedge Pin
Bracket Bolt & Nut
Kicker Bolt, Nut & Washer
Lining up structural lines and installation of reinforcing bars
Installation of wall panels
Installation of Slab panels
Installation of reinforcing bars on the slab panels before casting the concrete
Casting and curing of the concrete
1. Customer Consulting: Project assessment, preliminary communication
2. Technical support: Construction drawing analysis, output specifications of formwork drawings
3. Quotation: According to project requirements, quote with professional designs
4. Confirm Order: Customer analysis quotation, 30% payment for deposit
5. Production process: Standardized production according to strict designs
6. QC System: Inspection during and after production
7. Test assembly: Assemble the formwork in warehouse before delivery
8. Barcode: Mark the formwork components before dismantlement and delivery
9. FAE: After sales support, provide technical training or on-site installation service
Advanced production equipment
Strict technology of Aluminium formwork
QC inspection system, in-Time delivery
With multiple production lines, completely meet the client’s delivery requirement
b. Self-designed Program
With professional senior architect engineers (R&D) and technical support before and after Sales (FAE), we are very confident to supply competitive quality and life-span product to the market.
c. Service on-site after sales
Before the shipment arrives at the site, our FAE can do training or send one or a group of skilled supervisors to the construction site for preparing mock-up the Aluminum formwork system and dealing with unexpected events that might occur.