Hot Products

Aluminium Formwork Flat Tie System

Aluminium Flat Tie System

Aluminium Flat Tie System

It is mainly use to control and guarantee that construction quality. The use of lighter fixture and square pipe greatly reduces the labor intensity of installation workers and improves the installation efficiency. The use of disposable pulles does not require the installation of a plastic sheath, and the installation time is shortened without disassembling the cover and pulling the tabs.
Send InquiryChat Now


                                                               of flat tie system

The flat tie aluminum formwork mainly depends on the system to control and ensure the construction quality. The use of lighter clamps and square pipes greatly reduces the labor intensity of the installation workers and improves the installation efficiency. Using short diagonal braces and cement nails to strengthen the water and electricity pipes without damaging the floor. They are lighter, smaller, easy to handle, transmit and pass through and no need to install plastic sheathes or brush release agents for disposable pull sheets. After removing the mould, no need to remove the sheaths and pull sheets to shorten the installation time.


                                                                                                                                   of flat tie system


Short construction period

Early demolition system design, template set, supporting three sets, 4-6 days / section, can be pipelined construction, improve construction progress, save management costs.


Wide range of applications
It is suitable for the use of the walls, horizontal floors, columns, beams, staircases, windowsills, floats, toilets, etc., and is useful for two structures, such as girders, structural columns and counter sills
小图标7.jpgGood stability
The bearing capacity of aluminum formwork can reach 60KN/. It can meet the requirements of bearing capacity of most residential, construction, pipe gallery, basement and other projects.
小图标4.jpgHigh construction efficiency
Standardized design, convenient assembly, standard board about 22kg/, manual handling and assembly, without mechanical assistance, up to 50 / person / day, cost saving.
小图标7.jpgHigh reuse rate
The aluminum alloy profiles with integral extrusion are used as raw materials, and the construction can be reused more than 150 times, and the average cost is low.
小图标9.jpgGood demoulding effect

With  less joints and high accuracy, the surface quality of concrete is  smooth and smooth, which can meet the requirements of veneer and fair  faced concrete.

小图标4.jpgCivilized construction
The parts can be reused. There is almost no garbage left after the demolishing. The supporting system is simple in structure and easy to remove. The whole construction environment is safe, clean and tidy.

Low carbon energy saving

All materials are renewable materials, in line with national policy requirements for energy conservation, environmental protection, low carbon and emission reduction for construction projects.


                                                                                                                                    of flat tie system


                                                                                        Project cases

                                                                                                                                            of flat tie system




                                                                                                                                       of flat tie system


Hot Tags: aluminium flat tie system, manufacturer, supplier, factory, design
  • facebook